Co-Chairs
Ms. Cindy Ashforth
Federal Aviation Administration
1601 Lind Ave SW
Renton, WA 98057
Tel: 425-227-2768
Email: cindy.ashforth@faa.gov
Dr. Larry Ilcewicz
FAA/Seattle Aircraft Cert. Office
1601 Lind Avenue, SW
ANM-115N
Renton, WA 98003
Tel: 425-917-6579
Fax: 425-917-6590
Email: larry.ilcewicz@faa.gov
Disbonding and Delamination Guidelines Task Group
Group Chapter
The Disbonding and Delamination is a Task Group under the Guidelines Working Group. The group will determine an overall strategy for the handbook to address disbonding and delamination. The task group will examine methodologies needed to assure through-thickness integrity of bonds and laminations in polymer matrix composites. The group will review the existing document to assure that the sections related to delamination and disbonding are up-to-date. The group will inherit maintenance responsibility for sections on bonded joints written by the Joints WG. Appropriate interfaces will be made with existing groups to address identified gaps, in particular a strong interface will be created with the Damage Tolerance Task Group. The creation of new sections may be recommended if the current outline does not meet the needs of the strategic approach.
Co-Chairs
Ms. Lisa McHugh
Northrop Grumman
1 Hornet Way M/C 902/W2
El Segundo, CA 902450
Tel: 310-332-6352
Email: lisa.mchugh@ngc.com
Dr. Ronald Krueger
National Institute of Aerospace
100 Exploration Way
Hampton, VA 23666
Tel: 757-864-3482
Fax: 757-864-8911
Email: rkrueger@nianet.org
Damage Tolerance Guidelines Task Group
Co-Chairs
Mr. Doug Cairns
Montana State University
Dept. of Mechanical Engineering
Roberts Hall 220
Boseman, MT 59717
Tel: 406-994-6050
Fax: 406-994-6292
Email: dcairns@me.montana.edu
Mr. Patrick Enjuto
Boeing
Email: Patrick.Enjuto2@boeing.com
Mr. Allen Fawcett
Email: allen7e7@msn.com
Mr. Mike Smeets
Fokker Landing Gear
Grasbeemd 28
Helmond 5705 DG
The Netherlands
Tel: +31 0 492-575286
Email: mike.smeets@fokker.com
Dr. Simon Waite
European Aviation Safety Agency
Postfach 10 12 53
Köln D-50452
Germany
Tel: +49 (221) 89990 4082
Fax: +49 (221) 89990 4582
Email: simon.waite@easa.europa.eu